Conventional Fire Alarm System

Conventional systems are designed to give a basic zonal and alarm call to the occupiers of a building. Panels can be standard or high specification and only go up to 32 zone therefore if you need a bigger system an addressable would be more economical.

 

Addressable Fire Alarm System

Addressable systems are designed to be more specific on the location of the fire and can be programmed with location names for ease of use. Operates on a single 2 core loop cutting on installation costs in larger properties. Each loop is monitored every 4 seconds to ensure consistency throughout the building


HE-PSU(1.25) 1.25A Output PSU Full monitoring of mains failure, battery disconnection and total power failure   HE-PSU(2.5) 2.5A Output PSU   Full monitoring of mains failure, battery disconnection and total power failure Robust, fully welded cabinet design with key lock…
Duct Probe The SDP-2 is a Duct Probe housing allowing a standard photoelectric smoke detection device, either a conventional detector or an analogue sensor, to be mounted on the outside of an air duct for the purpose of monitoring the…
TCH-B100 Analogue Device Address Programmer Lightweight Design Quick and Reliable Addressing Over 8000 Address Settings From One Battery Displays Sensor Analogue Value PL Range Programming Leads PL-1 - Programming Lead for use where the device cannot be fitted directly onto…
SOLO 461 Cordless Heat Detector Tester Safe, cable-free, battery-powered operation  Supplied with 2 Battery Batons™ and a fast charger Intelligent device, only heats when detector present Clear cup allows view of detector LED Can be used with ESP heat sensors…
True loop Emulator The TE-TLE is a 'virtual' fire detection system. Once the Fire Alarm Control Panel is connected to the computer via the Interface, a 'virtual' system can be created within the True Loop Emulator software Allows simulation of…
The Hochiki Loop Commissioning Tool, model TE-LCT, is a powerful yet easy to use loop installation and commissioning device Loop Commissioning Tool Assists in the determination of Earth, Open and Short Circuit faults on loop cabling Easy to use, menu-driven…
icon

Full RSS Feed

icon

Follow Us

icon

Stumble Upon

icon

On Facebook

icon

On Myspace

icon

LinkedIn